10kv Dielectric Loss Insulation Power Factor Tester Transformer Capacitance & Tan Delta Test Equipment

Each of our Multi-Layer Architecture lab twin screw extruder, Desktop Blown Film Machine, Carbon Black Dispersion Tester is produced in a fine manner and inspected in strict accordance with quality standards to ensure that our customers get the best finished one. We bring together a national excellent service team to provide you with one-stop services from design, customization, installation, and after-sales. Our team through qualified training.

Lab Filter Pressure Value (FPV) Tester In Good Quality

1. Product description

The polymer-based mixture containing a certain concentration of pigment flows through the extruder equipped with a melt pump and a filter assembly supported by a porous plate. A melt pressure sensor is installed at the front of the filter assembly, and the starting pressure (test base material) The maximum pressure difference measured by the sensor before the melt pump and after the panel network component is the filter pressure value (FPV). Its size is used to characterize the dispersion effect of the color masterbatch. The smaller the FPV value, the better the dispersion.

2.Technical Parameters

Model	CMSI-35/05
Applicable materials	PP、PA6、PA66、PET、PS、PE etc.
Screw diameter	20mm
L/D	28
Screw speed	0-100rpm
Melt pump rated flow	60 cm³/min（5cc）
Melt pump drive power	0.75kw
Melt pump pressure working range	Before pump:0-100bar;After pump:0-300bar
Pressure measurement range/accuracy	0-50mpa,0.5%f.s
Heating/cooling method	Electric heating/Fan cooling
Operating temperature	Room temperature-350°C
Temperature accuracy	±1℃
Screen plate 1	Dual-layer, filtration layer 615×108
Screen plate 2	Dual-layer, filtration layer 615×132
Screen plate 3	Trip-layer, filtration layer 165×1400
Max.output	5kg/h
Main motor power	3kw
Control	SIEMENS PLC
Working voltage	Three-phase 380VAC±10%,Single-phase 220VAC±10%,50Hz
Rated power	Approx12kW
L x W x W	1215mm×635mm×1265mm
Weight	Approx 450kg

Filter Pressure Value (FPV) Tester application:

● Filling material dispersion test.

● Quality Inspection and Control of Film Preparation Process

● Color masterbatch quality inspection and control

3．About us

4．FAQ

1 Q:what about the warranty with after-sale service?

A: The test mchine is guaranteed for 12 month by POTOP, beside,we can help you to repair your problem controller, even it’s not from our factory, after the warrantly, the professional after-sale service team will provide perfect technical support and help customer solve problems encountered while using our product, handles guest problem and complaints in a professional and timely

2 Q:can you customize the machine?

A: We can design and manufacture all kinds of non- standard machinery according to customers requirement. OEM is available for POTOP Products

3 Q:Which brand are the accessories and electronic components in your machine?

A:We have a long term cooperations with Siemens, Schneider,Nuode etc.

4 Q:How many years manufacture experience do you have ?

A：We have 12 years' experience in this field. All staff have rich experiences to finish their work.

We have cultivated a professional technical team and established a high-quality and highly dedicated sales team to make sure that our 10kv Dielectric Loss Insulation Power Factor Tester Transformer Capacitance & Tan Delta Test Equipment enjoys the popularity on the market for its performance. We adhere to the business philosophy of openness and sharing, and the strategic direction of green development. We insist on strengthening information construction to improve our management level and competitiveness.

Hot Tags: filter pressure value tester, China, suppliers, manufacturers, factory, price, for sale, PLA ABS Filament Production Line, blown film extruder, Twin screw extruder, Multi Screw Stretch Cast Film Extruder, Accuracy High Polymer Casting Products, benchtop twin screw extruder