Torque Rheometer Rheological Testing Of Polymer Materials

The POTOP torque rheometer is to put the material to be tested into the mixing chamber, and the material is subjected to different rotational speeds.

At the same time, the force exerted by the two rotors that rotate in opposite directions is continuously transmitted between the rotor and the chamber wall mixing and shearing, the ribs of the rotor are also subjected to the reaction force of the material, and the torque rheometer passes the torque,the reaction force measured by the sensor is processed by computer software to obtain the torque change with time.

• Corrosion-resistant, heat-resistant and wear-resistant mixing chamber.
• Servo motor drive.
• ETH torque sensor.
• Data testing with high precision and good repeatability.

 

 

 

 

1. When installing the experimental platform, attention should be paid to the connection sequence of the thermal sensor and the heating power interface. The wrong connection sequence will lead to incorrect temperature control.

 

2. When the temperature in a certain area of the mixer or extruder is 10°C lower than the set temperature, the residual material in the equipment may not be completely melted, and rotating the motor at this time may damage the equipment. The experimental operation can only be started after the temperature and the output speed of the motor have reached the set value and stabilized.

 

3. The mixing device should be cleaned after each experiment, and the rotors in the mixing device should not be reversed; R to R, L to L. Remember to turn off the power.

 

4. After the experiment, add a small amount of lubricant, then disassemble and clean the mixer

 

FAQ:

 

1,Q: After machine arrival, what will be the service for installation and training?

A: If you are close to our local agent, you can contact them directly for spot service.Usually we will send our engineer for overseas spot service to finish installation of the machine and operation training, which will take extra cost like air-ticket and accomodation.

 

2,Q：Can your engineer come to the construction site to guide the installation?

A:Yes, we can arrange our engineer to guide your installation, and salary is 400USD per day for one person, the air ticket/ visa/ local accommodation/ local traffic is in charge of customer.

 

Generally there is no need to send our engineer to guide, because we will provide detailed installation drawings to the customer, the customer only need to find special installation team to execute.

 

3,Q:will you provide after-sale service after we buy the Torque rheometer rheological testing of polymer materials?

A：Yes, we will guide you the installation and operation steps when you receive the machine.

Hot Tags: torque rheometer rheological testing of polymer materials, China, suppliers, manufacturers, factory, price, for sale, Capillary Rheometer, Torque Rheometer PVC, inline extrusion rheometer, Ultra High Weight Polyethylene Rheometer, POTOP Extrusion Rheometer, Capillary rheometer astm