Products

Small Twin-Screw Sheet Extrusion Calender

Laboratory small twin-screw extrusion calender with screw diameter of 35mm and length-diameter ratio of 40.

Description

Product description

1.The melt pump and static mixer can be selected to improve the plasticizing and homogenizing effect of materials
2.Optional mold heater/chiller to accurately control the temperature of calender roll
3.Optional waste edge collection device, convenient for trimming and waste collection, and improve the quality of winding
4.The optional constant tension winding device can improve the uniformity of winding and sheet quality
5.Different surface treatment of sheet can be achieved by selecting patterned roller/fogging roller
6.Hydraulic cylinder or cylinder can be selected for different materials
7.Double roll/three roll/four roll calendering can be selected for different processes

Product application

1.Sheet preparation of various materials
2.Research and development of material formula
3.Calendering of high viscosity materials
4.Multi-layer functional material composite

Product picture

Twin-Screw Sheet Extrusion

Calender

material composite

Product Parameter

Name	Parameter
Screw diameter	30mm
Length-diameter ratio of screw	40
Rated power	26.7kW
Screw speed	600rpm
Die width	300mm
Maximum operating temperature	300℃
Temperature control accuracy	±1℃
Applicable scope	PE/PA
Maximum output	40 kg/h
Working voltage	3-phase AC380V, 50Hz
Size(LWH)	3090×654X1800mm