Latest Products
Contact Us
- 202,101, No. 3,Kaifa Road,Dalong Street,Panyu District,Guangzhou,Guangdong
721386668@qq.com
+86-15099958922
3D Printing Filament Consumables Testing Machine For PE/PP/PET
The main machine is mainly composed of extrusion reduction motor, hopper, screw barrel, die head, water tank, diameter gauge, traction device, wire arrangement and winding device and electrical control system. The main motor power is 3.0kW and the rated speed of the screw used in this machine is...
Description
The main machine is mainly composed of extrusion reduction motor, hopper, screw barrel, die head, water tank, diameter gauge, traction device, wire arrangement and winding device and electrical control system.
The main motor power is 3.0kW and the rated speed of the screw used in this machine is 120r/min.
high quality
Strict quality inspection, components are made of high-quality components such as Siemens and Schneider, and comprehensive quality inspection is carried out before leaving the factory to ensure product quality.
The barrel and screw are one of the core working parts of the extrusion unit. Both are made of high-performance materials, and the barrel surface is nitrided.
product key technologies
The temperature measurement and control system consists of a heater, a thermocouple, a solid-state relay, a cooling fan, a PCC intelligent control system, etc.
The barrel heating adopts a ceramic heater, which has a split structure and a shape that matches the barrel appearance. It is fastened to the barrel with screws and has strong versatility and is easy to disassemble and replace.
PLC intelligent control system
multiple information input and output, with powerful functions of information collection, information judgment, information feedback, etc. In terms of temperature control, PID plus fuzzy control algorithm can be used according to the temperature measured by the thermocouple, and the control information can be fed back to each actuator to determine the on and off of the solid-state relay and the cooling fan, so that the temperature of each zone is maintained at the set temperature. An operation display screen is installed on the panel of the electric control cabinet, which can easily set and adjust the parameters of each link, and also facilitate the observation of the control of each process, fault warning, etc.
Wheel clamping mechanism
Lift the handle, introduce the wire, loosen the handle and press it tightly. The wheel surface will undergo elastic deformation to press the wire between the two rollers, and drive the wire to move under the action of friction. The moving speed of the wire can be adjusted by adjusting the speed of the traction wheel.
product parameters
| Screw diameter |
20 mm |
| Screw aspect ratio |
28:1 |
| Maximum screw speed |
120 rpm |
| Maximum torque |
170 N•m |
| Number of temperature zones |
4 |
| Power of temperature zones |
3.5kW |
| Maximum operating temperature |
350 ℃ |
| Temperature control accuracy |
±1 ℃ |
| Rated power of screw motor |
3.0 kW |
| Rated speed of screw motor |
1500 r/min |
| Die diameter |
3mm |
| Material adaptability range |
PE/PP/PET and composite materials |
| Maximum output |
2 kg/h |
| Working voltage | 3-phase AC380 V, 50 Hz |
| Length × width × height | Approx. 2240×1652×690mm |
| Storage temperature and humidity | Temperature: -25~+55 ℃ Humidity: 5~95% |
| Operating temperature and humidity | Temperature: +5~+45℃ Humidity: 5~95% |
3D printing consumables test line screw structure diagram
About Us
- More than 15 years of experience
- 90+ employees
- R&D personnel account for more than 26%
POTOP has deep knowledge in mechanical engineering, polymer shaping and processing. Combined with automation, electrical and electronic technologies, software development and programming, POTOP designs and fabricates high- end polymer lab & pilot machines for high- performance standard, and even with the ability to provide customers with non-standard polymer lab & pilot machines for specific needs. POTOP is the industrialization base for National Engineering Research Center of SCUT (The South China University of Technology) for Polymer New Forming Equipment – One of the most important organizations for polymer shaping and processing in China.
Very strict quality control is applied to manufacturing process in POTOP factory. The machines fabricated by POTOP are fully tested to ensure they can meet high standard performance requirements. The parts used in the machines have been strictly checked, and they are purchased from highly reliable suppliers such as Siemens, Schneider, Nord and so on. We carry out a full inspection of every component of our machines, from design, purchasing to fabrication, we pay full attention to every detail to ensure our machines can meet the customer's acceptance criteria. The machines fabricated by POTOP are at the high-end level in terms of quality.
|
Years of customization experience |
15 |
|
Product range of customization |
Polymer lab & pilot machines. |
|
Mechanical design capability |
|
|
Software development/ programming capability |
|
|
Electronic & electrical design capability |
|
|
Polymer shaping and processing solutions |
|
facebook 
linkedin 
pinterest 
twitter 
whatsapp 
youtube 
instagram Hot Tags: 3d printing filament consumables testing machine for pe/pp/pet, China, suppliers, manufacturers, factory, price, for sale, Twin Screw extruder 16 mm, Aluminum plastic Composite Film Extrusion Laminating Line, biaxial testing machine, Masterbatch Dispersion Tester, Triple Screw Extrusion Die Cutting Pelletizing Line, Micro Conical Twin Screw Compounder
You Might Also Like
