Products

Lab-Scale Blown & Cast Film Extrusion machine

Single Layer Casting And Film Blowing Machine is a combination of tape casting and film blowing molding technology, mainly used for polymer material sheet extrusion molding performance testing, polymer material sheet extrusion formula research and development, process optimization, cost control, and small-scale production

Send Inquiry

Description

Product Features

Lab-Scale Blown & Cast Film Extrusion machine is mainly used for plastic sheet extrusion molding, research on plastic sheet extrusion formulations, control of sheet extrusion molding process quality, and other fields. Used in the production of various thin film products in the fields of food, medicine, cosmetics, daily necessities, agriculture, etc., such as fresh-keeping films, packaging bags, plastic bags, raincoats, mulches, etc.

blow machine

Product Advantages

1.Lab-scale blown & cast film extrusion machine adopts advanced technology to produce film materials with stable and reliable quality.
2. The machine is characterized by high efficiency and energy saving, simple operation and easy maintenance, suitable for mass production.
3. The membrane material produced is light and soft, with good air permeability and moisture resistance, widely used in packaging, preservation, agricultural covering and other fields.
4. The machine has adjustable parameters to meet the needs of different materials, and the film produced is of uniform material and thickness.

roll

Detail of Lab-Scale Blown & Cast Film Extrusion machine

Detail of Lab small film blowing machine

Application of Lab-Scale Blown & Cast Film Extrusion machine

Material casting experiment.

Functional film.

Process optimization.

Research and development formula for sheet extrusion.

Product Benefit

ETFE Film is used in many ways

Parameters of Lab-Scale Blown & Cast Film Extrusion machine

Model	FDBI-25/26
Suitable raw material	PVDF,PBAT,PE,P
Screw Diameter	25mm
Die width	200mm
Screw Ratio	28
Product width	0-180mm
Product thickness	0.01-0.5mm
Roll surface width	260mm
Linear velocity	0-10m/min
Main motor power	3kw
Film blowing unit:
Folded diameter	200mm
Product specification	0.02-0.1mm
Roll surface width	260mm
Linear velocity	0-10m/min
Pressure measurement range/accuracy	0-50mpa,0.5%f.s
Temperature control accuracy	±1℃
working voltage	Three-phase 380VAC ± 10%, single-phase 220VAC ± 10%, 50Hz