+86-20-39283061
enLanguage
Lab BOPP biaxial stretching simulator video

Lab BOPP biaxial stretching simulator

Lab BOPP biaxial stretching simulator of POTOP has a maximum stretching ratio of 5:1 and is a pneumatic clamping device. Tensile test method: adjustable Stretching methods such as one-way limited, one-way unrestricted, two-way synchronous, two-way asynchronous, etc. Suitable materials are PP, PC, PVC, PA ,PI, PE, pet, etc

Description

Description Of Lab BOPP biaxial stretching simulator


(1) The drawing system has four sets of fixtures and their driving components. Where each pair of rails is parallel to each other, and perpendicular to each other - to each other

Each fixed installation of a group of fixtures; The fixtures are connected by successive hinges.


(2) The servo motor is used to drive the two groups of forward and reverse lead screws to realize the stretching action in the X and Y directions respectively. To draw or press with thick film, thick film four sides by the film clamp, thick film after heating. The film clip is driven by two groups of telescopic and stretching mechanisms. Along the X, Y direction, etc

Distance motion, so as to realize bidirectional stretching of thick sheets.


(3) The heating system consists of two groups of closed hot air circulation system to heat the film. Short temperature rise time, accurate temperature control. It can pull simultaneously
The extended film is shaped.

IMG_20191230_180917

IMG_20191230_180924

IMG_20191230_180932

IMG_20191230_180938

BOPP Film

Advantages of Lab BOPP biaxial stretching simulator


  • Film thickness of up to 2 mm

  • Temperatures of up to 350°C

  • Air clamp and manual clamp optional

  • Quick adjustment of the process parameters
  • Operating mode: axial, biaxial, simultaneous, sequential

  • Quick temperature change by infrared heating systems


Laboratory Biaxial Film Stretcher For PVDF-1


Lab BOPP biaxial stretching simulator-1 (2)

Application of Lab BOPP biaxial stretching simulator


  • Development of new products in the field of high-end film

  • Physical and chemical properties of novel materials for film forming were tested and analyzed in the laboratory

  • High-end thin film formulation design

  • Process research and parameter optimization

Our customer

our customer

About us:


With advanced technology, excellent quality, complete variety, easy operation, and convenient expansion, Guangzhou POTOP products can be widely used in rheological testing, formula development, process optimization, quality control, innovative research, and design guidance. They are essential equipment for laboratories in universities engaged in research on polymer materials (plastics, rubber), technical support departments in the plastic raw material industry, and research and development departments in the plastic processing industry.

9789e096c4b0b08e35bfb353fcec9ec

_20230327091922


Hot Tags: Lab BOPP biaxial stretching simulator, China, suppliers, manufacturers, factory, price, for sale, Biaxial Film Stretcher, Biaxial testing, biaxial testing machine, cellulose acetate membrane, Biaxial Stretching Simulator, High Temperature Biaxial Stretcher for PTFE PI PPS

Parameters of Lab BOPP biaxial stretching simulator

Applicable materials

PP, PE, PET, PPVDF ect.

Sample thickness

20 μ m - 2 mm

Minimum sample size

95×95mm

Maximum sample size

110×110mm

The number of oven

2

Stretching speed

0-300mm/s adjustable

Stretch mode

At the same time, and first and then transverse

draw ratio

5:1

Number of clamps

Five units (20 in total)

Stretching force

1000N

Maximum temperature

350℃

Temperature accuracy control

±3℃

Driving mode

Servo motor

Working voltage

3φ380VAC±10%,1φ220VAC±10%,50Hz




Send Inquiry

(0/10)

clearall