Lab 10 Tensile Ratio Biaxial Stretcher

      Lab 10 tensile ratio biaxial stretcher  is a highly accurate, versatile and user-friendly design device that is widely used in the packaging, electronics, automotive and medical industries to analyze the behavior of materials under biaxial stress conditions.

Using the step of lab 10 tensile ratio biaxial stretcher

1)Operation preparation: check the equipment, make sure there is no debris on the operation surface, pneumatic clamps and guide rails; check the air pressure of the air source, pneumatic clamps nitrogen air pressure 2 ~ 2.5MPa, compressed air air air pressure 0.5 ~ 0.6MPa. Turn on the power switch, operate on the display screen, click on the "equipment reset" to let the pneumatic clamps and guide rails return to the preset original position. The air clamp and guide rail will return to the preset original position.
2)Parameter setting: According to the material and thickness of the film, set the bi-directional or uni-directional stretching, set the stretching ratio, set the stretching rate, set the heating temperature and heating time, and set the air inlet.
3)Clamp preheating: click on the loading bit to finish → clamping bit → move the rack in → close the air box → open the air box → move the rack out, preheating is completed.
4)loading test: click on the loading bit → tray up → clamping bit → tray down, when the film sheet in the workbench leveling clamping, the oven door opens, stretching the workbench to move into the heating area. The oven door closes and the equipment enters the heating and stretching state. After the stretching process is completed, the oven opens, the moving frame comes out, the stretching table moves back to the loading area, and the air clamp unloads and loosens the clamp, and the specimen film is taken out.
Clamp, take out the specimen film.
5)Equipment shutdown: After the test is completed, the pneumatic clamps return to the clamping position, turn off the power supply and gas source, check and clean up the operating surface, cover the air clamp stopper. (Note: high temperature, to cool down long enough to avoid damage to electrical parts of the internal temperature is too high (each box infrared temperature down to below 80 ℃ before shutdown).

 

The fixture structure of 10 tensile ratio biaxial stretcher

Advantages of 10 Tensile Ratio Biaxial Stretcher

• Infrared temperature measurement:Real-time control of membrane surface temperature.

• Global standards compliance: Meets ISO standards for material testing.

• Online monitoring :High-definition CCD motion camera and the imaging system composed of highlighted LED linear concentrating light source can timely and accurately reflect the process of stretching dynamics in time.

• Stress and strain data collection and test:In the process of stretching, the tensile stress and strain curve and data of X axis and Y axis can be obtaine.

 

 

Packing of 10 Tensile Ratio Biaxial Stretcher

FAQ:

 

1. Where is your company located? Is it possible to visit your workshop?

Our company is located in the beautiful city of Guangzhou,GuangDong .You are very welcome to visit our factory and check our product line.

 

2.When can the machine be shipped after order is placed?

The delivery time is depends on the machine model and order quantity, Please contact our staff for detail info.

 

3.Are the products shown on website ready to deliver after order is placed?

Most of machines are need to be produced once order is confirmed, some stock machines

maybe avalble due to different seasons, please contact our staff for detail info.

 

4.Do you have relevant certificate?

Yes, so far ,we have got certificate of CE, SGS, BV and so on.

 

5.What kind of payment terms are accepted if we plan to buy the Lab 10 Tensile Ratio Biaxial Stretcher?

TT (Telegraphic Transfer)

 Western Union

 

6. How about the warranty and after-sale service of the Lab 10 Tensile Ratio Biaxial Stretcher?

We provide one years warranty and lifetime technical support for all the machinery.

Help is always just one call or email, and then we can provide a suitable solution within 8

hours by analyzing and estimating the problem. Remote training and door-to-door service

is available.

Hot Tags: Lab 10 Tensile Ratio Biaxial Stretcher, China, suppliers, manufacturers, factory, price, for sale, Biaxial Stretching Simulator, High Temperature Biaxial Stretcher for PTFE PI PPS, Laboratory Biaxial Stretcher, cellulose acetate membrane, biaxial testing machine, Biaxial testing

Paramers of 10 Tensile Ratio Biaxial Stretcher (With Annealing oven)

Applicable Materials	PP, PE, PET, PPVDF ect.
Sample Thickness	20 μ m - 2 mm
Minimum Sample Size	95×95mm
Maximum Sample Size	110×110mm
The Number Of Oven	2
Stretching Speed	0-300mm/s adjustable
Stretch Mode	At the same time, and first and then transverse
Draw Ratio	10:1
Stretching Force	2000N
Maximum Temperature	350℃
Temperature Accuracy Control	±3℃
Working Voltage	3φ380VAC±10%,1φ220VAC±10%,50Hz